1. Operate only with the instructor's permission and after you have received proper instruction.
2. Remove jewelry, eliminate loose clothing and confine long hair.
3. Make sure all guards are in place and operating properly.
4. Always use proper eye protection.
5. Hold material securely with a vice or clamps.
6. Be sure the chuck key is removed from the chuck before starting the machine.
7. Select a properly sharpened bit. For metal, center punch when a hole is to be drilled.
8. Turn off the power if the work piece becomes caught in the drill. Do not stop the chuck rotation by hand.
9. Adjust the table or depth stop to avoid drilling into the table.
10. Select the correct speed: Normally, slower for drilling metal, faster for wood. The larger the bit, the slower the speed.
2. Remove jewelry, eliminate loose clothing and confine long hair.
3. Make sure all guards are in place and operating properly.
4. Always use proper eye protection.
5. Hold material securely with a vice or clamps.
6. Be sure the chuck key is removed from the chuck before starting the machine.
7. Select a properly sharpened bit. For metal, center punch when a hole is to be drilled.
8. Turn off the power if the work piece becomes caught in the drill. Do not stop the chuck rotation by hand.
9. Adjust the table or depth stop to avoid drilling into the table.
10. Select the correct speed: Normally, slower for drilling metal, faster for wood. The larger the bit, the slower the speed.
Drill Press Safety Rules 6-15-09